FOR SALE:
Lumber, carving blanks & turning squares
MAHOGANY (Honduras), CHERRY & WALNUT
[pictured in stacks at right]
Carving blanks or turning squares in various sizes:
Mahogany:
  • 1 7/16 X 3 3/8 X 15 1/4
  • 1 9/16 X 3 7/16 X 13 7/16
  • 1 5/8 X 1 3/4 X 13 1/4
  • 1 9/16 X 1 13/16 X 15 1/4
Cherry:
  • 1 9/16 X 2 7/8 X 13 9/16
  • 1 7/16 X 3 X 15 1/4
  • 1 9/16 X 3 7/16 X 12 1/4 & 13 5/16
Walnut:
  • 1 1/4 X 3 1/2 X 18
  • 1 9/16 X 3 7/16 X 15 1/4
  • 1 1/2 X 3 3/8 X 15 1/4
  • 1 1/4 X 2 3/16 X 18

Quantities for some sizes are limited, especially cherry.  For the
most part these pieces are rough cut on some sides.

Prices are based on approximate board feet:
  • Mahogany: $6bf
  • Cherry & Walnut: $5bf

Able to ship via UPS
Left stack is Walnut; next two stacks
are Cherry & two large stacks & one
on far right are all Honduras Mahogany
Examples of Walnut (left), Cherry
(center) & Mahogany (right)
2" thick CHESTNUT from old local Pennsylvania barn
Three boards:
  • 11 X 112 (17bf)
  • 11 X 120 (18bf)
  • 11 X 113 (17bf)
  • Could be some nails in these boards
  • $5.00 per board foot
Wide 5/4 Red Oak, FAS rough cut
  • total of 60 bf
  • all 10' long
  • widths from 11 1/2" to 13"
  • $ 3.85 per board foot
5/4 White Pine:
  • furniture grade, rough cut
  • random widths of 9" to 13"
  • all 8' long
  • $1.50 per board foot
FOR THE HOBBYIST:
  • CARVING BLOCKS & TURNING SQUARES:  If you are looking for
    carving blocks, turning squares or small quantities of lumber for your next
    project, I may be able to help.  I have a number of cutoffs of thick stock
    lumber, especially Honduras mahogany!  Also a number of smaller cutoffs &
    odd shaped thick stock - NOT LISTED.
  • TABLE LEG TURNING SQUARES:  I also have a limited amount of
    turnings squares that I had planned on using for table legs.
  • LUMBER:  Depending on recent projects, I often have small amounts of
    lumber available for local hobbyists - NOT LISTED.  Most are rough cut,
    but I do offer planing.
  • DRUM SANDING AVAILABLE:  I have a 50" wide Woodmaster drum
    sander & I do offer sanding services for anyone who is able to bring their
    table tops of other projects to my shop.

BELOW are a number of the items I have available at
my shop.  For smaller items, shipping via UPS is
available.
Eastern White Pine (on left):
  • 2" X 6" X 57" rough cut (4.75bf)
  • mostly clear with one large knot
  • great for carving or turning
  • $14

Spanish Cedar (on right):
  • 2" X 7 3/8" X 42 1/2 rough cut (4bf)
  • knot free
  • $16
White Pine Turning Squares:
  • 1ea  2 3/4" square X 47" long  $7.00
    [on left]
  • 4ea  2 3/8" square X 31" long  $5.00ea
Turning Squares for Table Legs:
Maple, Ash & Oak
sold as group of four only
Soft Maple:
  • 3 1/2" sq X 31" L
  • $80 for set
Ash [set "A"]:
  • 3" sq X 29 5/8" L
  • $45 for set - SOLD
Ash [set "B"]:
  • 3" sq X 30" L
  • $45 for set - SOLD
Red Oak:
  • 2 3/8" sq X 30" L
  • $45 for set
ALLEN WOODWORKING
located in
EAST BERLIN, PA  17316
1-717-624-9011
info@allenwoodworking.com